SS Engineering Company,Rajapalayam | ssenggrjpm.com | Voestalpine Bohler UTP Welding Products


BOHLER PRODUCTS

Voestalpine Böhler Welding Products

At SS ENGINEERING COMPANY we concentrate on our core business to provide the highest level of expertise within our portfolio. The customer is in the center of all activities. Our developments, services, and products are geared to the customer needs in order to serve them in the best way. Voestalpine Böhler Welding is the global top address for the daily challenges in the areas of joint welding, wear and corrosion protection as well as brazing.

Click on the product name to get an overview of its features and specifications

  • HARDALOY SERIES
    • HARDALOY I
      FEATURES

      A medium heavy coated rutile type electrode for hard surfacing of carbon steel and low alloy steels, where hardness of 250 Brinell is required.
      Hardness: 2 layer : 240 - 270 BHN

      APPLICATIONS

      Suitable for the surfacing on tram types, gears, pinion teeth, coupling, hammers and spindles machines, rollers, sprockets, pulleys, shaft, rail points and crossings etc.

    • HARDALOY II
      FEATURES

      A hard facing electrode for mild steel, carbon steel and low alloy steels, where 350 Brinell hardness is required.
      Weld deposit provides good combination of abrasion and impact properties.
      Hardness: 2 layer : 36 - 40 HRc

      APPLICATIONS

      Suitable for the surfacing on couplings, cog wheels, cold punching dies, Timming edges, rail ends and crossing, steel castings, wobbler ends, Cams, Gear Shaft..

    • HARDALOY III
      FEATURES

      Rutile coated type air hardening electrode for surfacing applications on mild steel, carbon steel and low alloy steel where 550 Brinell hardness is required.
      The welds are non-machinable and can only be ground.
      Hardness: 2 layer : 57 - 60 HRC

      APPLICATIONS

      Used for surfacing on hammers, rotor discs, metal cutting and forming tools, wheels, bulldozer blades etc.

    • HARDALOY Mn
      FEATURES

      Hardaloy – Mn is a medium heavy coated basic type austenitic manganese (12-14%) steel electrode specially designed for re-conditioning of austenitic manganese steel parts.
      The weld metal has good resistance to wear under severe impact. Weld deposit is work hardenable for high impact applications.
      Hardness: 170 -220 BHN (As welded) and 50 - 54 HRc after Work Hardening

      APPLICATIONS

      Suitable for the surfacing on crusher jaw hammers, manganese steel rails, rail cross-over, cement grinding rings, austenitic manganese steel casting and hammers, crusher mantles etc.

  • STEEL ELECTRODES
    • UTP 68 HH
      FEATURES

      Suited for joining ferrous alloys, High Nickel alloys, Dissimilar alloys. High elongation upto 45 %. Tensile strength : 95000 PSI.
      Recommend for thermal shocks and high temperature joints.
      AWS A5.11 : E Ni Cr Fe 3

      APPLICATIONS

      Suitbale for crack repair jobs, High tensile loads, Su zero temperature joints, Dissimilar joints.

    • UTP 65
      FEATURES

      High tensile strength electrode recommended for shaft, gear teeth, pinion crack repair jobs. High tensile strength joints. Dissimilar steels.
      Tensile strength : 120000 PSI

      APPLICATIONS

      Gear teeth, Pinion, shaft reconditioning jobs. Dissimilar steel joints.

    • UTP 63
      FEATURES

      Fully austenitic deposit Cr Ni Mn electrode. Suitable for dissimilar joints. Wear plate and Hardox plate joints. Mn steel to steel joints.
      Tensile strength: 95000 PSI.

      APPLICATIONS

      Wear plate, Hardox plate, Mn steel plate joints. Dissimilar steel joints.

    • UTP 68 H
      FEATURES

      High Cr Ni steel electrode. 25/20 type. High temperature resistant upto 1100Deg C.
      AWS A5.4 : E 310-16

      APPLICATIONS

      Kiln Anchors joints, Tip casting joints. SS plate joints.Furnace plates.

    • UTP 613 Kb
      FEATURES

      A basic coates stick electrode for joining of boiler tubes, root joints in pipes and sections.
      High arc force ensure excellent bonding. X- Ray quality joints.
      Tensile strength ; 70000 PSI. AWS E 7018 H4 R

      APPLICATIONS

      Root layer for pipe lines and heavy section joints. Suitable for cast steels, Boiler grade steels.

  • CAST IRON
    • UTP 819 FN
      FEATURES

      Suitable for joining of Grey cast iron, Nodular cast iron, Mallable cast irons. Joining cast iron to steels. Cast iron crack repair jobs.

      APPLICATIONS

      Cast iron anvils, gear box casings, machine beds, cast iron pipe joints.

    • UTP 815 C
      FEATURES

      Suitable for joining of Grey cast iron, Nodular cast iron, Mallable cast irons. High machinable electrode and excellent bonding with base meatals.

      APPLICATIONS

      Cylinder head cracks, Exhaust manifolds, anvils, sliding tables for machine tools.

    • UTP 817
      FEATURES

      Suitable for buttering layer of poorly weldable cast iron. Seal all impurities in contaminated cast irons

      APPLICATIONS

      Buttering layer for grey cast irons, oil soaked cast iron parts.

  • HARDFACING
    • UTP LEDRUIT 61
      FEATURES

      High Cr C electrode for excellent abrasion and impact resistant.
      Hardness; 58-60 HRC in 2 layers.

      APPLICATIONS

      Crusher hammers, Blow bars, impacter arms, Jaw crushers, Scraper blades

    • UTP LEDRUT 65
      FEATURES

      Superior complex carbide electrode for high abrasion and erosion resistant in 500 Deg C.
      Hardness ; 63-65 HRC in 2 layers

      APPLICATIONS

      ID Fans, vent ducts, Dam rings, Classifier blades, scraper blades, pump screws

  • ROBOTIC WIRES
    • UTP AF ROBOTIC 503
      FEATURES

      Seamless core wire Cr Mo Ti alloyed metal cored wire for hardfacings on parts subject to abrasion, compression and high temperature.
      Hardness; 47-52 HRC upto 500 Deg C

      APPLICATIONS

      Hot forging dies, Trimming edges, Steel mill rolls, Blast furnace bells.

    • UTP AF ROBOTIC 453
      FEATURES

      Seamless core wire Cr Mo alloyed metal cored wire for hardfacings on parts subject to abrasion, compression and high temperature.
      Hardness; 42 -47 HRC.

      APPLICATIONS

      Steels mill rollers, Guide rollers.

  • FCAW WIRES
    • SK AP -O
      FEATURES

      It is a medium heavy coated basic type austenitic manganese (12-14%) steel wire specially designed for re-conditioning of austenitic manganese steel parts.
      The weld metal has good resistance to wear under severe impact. Weld deposit is work hardenable for high impact applications.
      Hardness: 20- 22 HRC (As welded) and 45-50 HRC after Work Hardening

      APPLICATIONS

      Suitable for the surfacing on crusher jaw hammers, manganese steel rails, rail cross-over, cement grinding rings, austenitic manganese steel casting and hammers, crusher mantles etc.

    • SK 162-O
      FEATURES

      High Cr C wie for excellent abrasion and impact resistant.
      Hardness; 58-60 HRC in 2 layers

      APPLICATIONS

      Crusher hammers, Blow bars, impacter arms, Jaw crushers, Scraper blades. Base layer for VRM Tables

    • SK A 43-O
      FEATURES

      Superior complex carbide electrode for high abrasion and erosion resistant in 500 Deg C.
      Hardness ; 63-65 HRC in 2 layers

      APPLICATIONS

      ID Fans, vent ducts, Dam rings, Classifier blades, scraper blades, pump screws, VRM Table and tyre hardfacing

    • SK 260 NB – C- O
      FEATURES

      Martensitic alloy alloy with high boron carbides. Excellent resistant to high stress abrasion and erosion.
      Hardness : 60-63 HRC

      APPLICATIONS

      Roller press in cement mills, ID Fans and screw pumps.

  • BOHLER PRODUCTS
    • BOHLER ELECTRODES AND WIRES
      FEATURES

      E 6013, 7018, 8018, 9018 and all standard consumables. GMAW 71 TI wires, GTAW wires, FCAW wires.

      APPLICATIONS

      For all kind steel works and fabrication works

    • SS ELECTRODES AND WIRES
      FEATURES

      SS 308, 309L, 316, 312, 304, 409, 410 all series TIG, MIG, FCAW wires

      APPLICATIONS

      For all kind of SS grade jobs.

    • POWDERS
      FEATURES

      FOR SURFACING. Boron carbide, Tungsten carbide, Cobalt based, Ni based powders for surfacing jobs.

      APPLICATIONS

      For surface roughness and reconditioning of machine parts

    • FONTORGON
      FEATURES

      Brazing alloys, Silver brazing, Copper brazing alloys

      APPLICATIONS

      Joining of tools, carbides

    • CUTTING AND GOUGING
      FEATURES

      CUTARC, UTP 890 AS for metal removing.

      APPLICATIONS

      Gouging and drilling holes

©COPYRIGHT 2020   All    Rights    Reserved   ssenggrjpm.com